Видео

@@ajshah2748 You’re welcome, don’t forget to take a minute to Subscribe to our Channel✌️

We as Contractors always replace it, because we have to warranty our work. Homeowners on the other hand don’t always have the tools, and all necessary materials so, this is a great option. To answer your question, the body rarely fails. Don’t forget to Subscribe for more content.👍

Unplug the timer and plug a drill or blow dryer (ohm meter) into the outlet. That way you’ll know if you have actual power there. The battery will create a display but doesn’t have the power to run the zones. Hope that helps, be sure to take a minute to Subscribe to our Channel for more info.

Would you like to ask a question?

You’re very welcome, thank you for taking the time to leave a message. Don’t forget to take a minute to Subscribe to our Channel. It will bookmark us for the future.😁

One at a time….hope that helped. Don’t forget to Subscribe for more great tips.✌️

Always a pleasure to help out. Be sure to Subscribe to our Channel for more great content.👊

Double check you’ve programmed a run time for zone 3 in the correct program. If that doesn’t work it’s either a wire issue or solenoid issue. Let me know if you need more help, don’t forget to Subscribe and tap notifications so you’ll know I answered you.

@garyssprinklerrepair I think it might have been a solenoid issue. I messed with the wires a bit and it started working. Thank you!

@@bbqjones cool, double check all the wire nuts are tight. Irritrol valves had an issue a few years ago with the wires shorting at the top of the solenoids. (Lawn Genie) homeowner version made by the same Co.

Glad it helped you get the zones back, hope you remember to Subscribe to our Channel it really helps us grow.😁

@@allenhumphrey6970 turn the dial to start time, next push the right arrow it should show 2-A with no start time…add your desired start time using the up arrow and push enter. Return the dial to Auto…..done. Don’t forget to Subscribe to our Channel it helps us a lot.👍

Very possible, this is a pretty old timer. Are you remembering to turn the dial back to auto/ run position after doing the manual program?

@@garyssprinklerrepair yes

Possibly time for a newer controller. Try the Hunter x-2 I’m sure you’ll like it. Be sure to subscribe to our Channel. Btw I have a video of the X-2 there, if you want to take a look 1st.

😁 You’re safe, it’s here to stay.👍

You’re welcome Lynn, hope you remembered to Subscribe to our Channel. It helps us grow.

Yes it does, when it’s finished with the A program it will check to see if you’ve programmed anything in B program. Hope that helped, be sure to Subscribe to our Channel it really helps us grow.👊

You have a bad valve, hope that helps

Awesome, don’t forget to Subscribe to our channel for more great content.👍

Glad to be of assistance, hope you took a minute to Subscribe to my Channel. I have a lot of other content. Happy Fathers Day

No

Thank you, take a minute to Subscribe to our channel it really helps us to grow.👍

When I’m on “System On” at the top of the screen it’s running Program B and I would like to get it back to running program A.

Turn the dial to start time and then push the A, B program button until you see A. Return the dial to Run, you’re done. Hope that helps, don’t forget to Subscribe.👍

Thank Taz, appreciate the positivity. Hope you took a minute to Subscribe to our channel, we have a lot more content.👍

Super happy to hear the good news. We have a lot more content on our channel so, be sure to Subscribe.😁

You’re more than welcome, don’t forget to Subscribe to our Channel for more content. 👍

Make sure the station are programmed in the A or B program and the selector switch below them is in the correct location A…..B…or both. Be sure to set a start time for that program and chose your watering day you want “On.”Then put into Auto

Let me know if you still have questions. Don’t forget to Subscribe ✌️

Glad it helped out Rudy, don’t forget to Subscribe to our Channel we have lots of other content.👍

Great to see a regular to my Channel still coming back. Much appreciated my friend.👊

Have you double checked to see if the water to all of the valves is “on”? You can verify that but manually turning on the valve from the small bleed screw on top of the valve. Let me know if you still have questions. Please take a minute to Subscribe to our Channel we have lots more content.👍

When you scroll the time past midnight it will change the pm to am automatically.

Wow, glad I saved you some money. Always good when you can do that. Hope you remembered to Subscribe to our Channel ✌️

Done!

@alfredocardwood2775 Great work👏

Fantastic!, don’t forget to take a minute to Subscribe to be notified as about our new content.👏

Thank you, don’t forget to a minute to Subscribe so you don’t miss out on our new content.

You are so welcome! Don’t forget to Subscribe 👍

Thanks Bud, most likely the O-ring on the solenoid is either torn or stretched some. I would just swap the top on that one too. Be forewarned when turning the water back on sometimes if using a Irritrol (or Lawn Genie) they will pop their diaphragms out if the waters turned on too fast. Not the case with Rainbird. Double check that the manual bleed screw is also closed. Hope you take a minute to Subscribe. 👍

The preset schedules applies to days not start times. If the time I coming on at weird timer check your start times. (There can be as many as 4 start times per program A,B etc.) make sure those are cleared out. Midnight is used to clear any unwanted start times. Hope that helps, don’t forget to Subscribe it really helps us too.👍

@@garyssprinklerrepair Thank you, great video and fast response.

Thank you as well for the positive feedback. Hope you took a minute to Subscribe.✌️

Thank you, hope you’re doing well, I still have my sweatshirt. Best swag I’ve bought on RUclips yet.

@@garyssprinklerrepair right on man 😁

Just the diaphragm on this one, tried to save them some money, they were elderly. Thanks for commenting, this was supposed to be a RUclips short.